Armasight CO LR
The Armasight CO-LR (Clip On – Long Range) is a Night Vision unit that mounts in front of an existing day scope, and converts the day scope to night vision capability up to ranges of 1000 yards.
Suitable for use with most day time sights, telescopes or binoculars (up to 12X magnification)
Armasight is Owned by FLIR
Accessories can be ordered after your purchase (it’s a long list) - see the Manual under Downloads for a list
The CO-LR can be mounted/dismounted on a standard Picatinny rail in seconds, and with no tools required. Because the CO-LR is mounted in front of your own day scope, the shooters eye relief is not altered, and shot release and follow through all remain intuitive – because the unit is factory bore-sighted to better than 1MOA accuracy, no alteration in zero is experienced, so it really is as simple as mount-focus-shoot, just as in day time.
FEATURES
- Converts your daytime scope, sight, or binoculars into night vision devices
- Mounts in front of any day scope with no re-zeroing required
- Available in a variety of high-performing Gen 2+ image intensifier tube options
- Wireless remote control
- Manual gain control for the best possible image contrast in both high and low light conditions
- Powered by a single AA or CR123A battery
- Low battery LED indicators appear in the viewing area of the CO-LR
- Bright light cut-off system
- Automatic shut-off system
- Filled with dry nitrogen to prevent internal fogging
- Mounts on Picatinny/ Weaver rail with a quick release mount
- Mounts on weapons using a short Picatinny/ Weaver rail with the optional FSRS system
- Long-range XLR-IR850 illuminator
- Mil Standard compliant
- Limited two-year warranty
Optional Parts
These can be ordered after you process the purchase - we will email you to check if you needed anything
The Mounting systems are for mounting the unit DIRECTLY to your scope - rather than to a rail in front of your scope
See the Manual in the downloads section for more details - Page 16
| Mounting System #1 for Daytime Optics with 25.4-30 mm Objective Diameter - $120 |
| Mounting System #2 for Daytime Optics with 38-42 mm Objective Diameter - $120 |
| Mounting System #3 for Daytime Optics with 46.7-50 mm Objective Diameter - $150 |
| Mounting System #4 for Daytime Optics with 56-58.7 mm Objective Diameter - $150 |
| Mounting System #6 for Daytime Optics with 62 mm Objective Diameter - $150 |
| Weaver Mount #60 replaces QRM to weaver base for IR Illuminator - $15 |
| Extended Rail Adapter #85 - Dovetail Weaver Picatinny Rail Adapter (extends scope base) - $125 |
| Hard Shipping/ Storage Case #102 - $175 |
| IR850XLR A-Focal Doubler - Enhances performance of IR850-XLR - $210 |
Downloads
SPECIFICATIONS
| Feature | CO-LR GEN 2+ ID MG | CO-LR GEN 2+ HD MG | CO-LR GEN 2+ QS MG |
|---|---|---|---|
| Resolution | 47-54 lp/mm | 55-72 lp/mm | 47-54 lp/mm |
| Magnification | 1x (recommended to use with up to 12x day time optics) | ||
| Photocathode Type | Multi-Alkali | ||
| Battery Life | 45 hrs (3V) / 25 hrs (1.5V) | ||
| Lens System | F/1.54; 108 mm | ||
| Bright Light Cut-off | Yes | ||
| Automatic Shut-off System | Yes | ||
| Infrared Illuminator | Detachable Long Range IR Illuminator | ||
| Low Battery Indicator | Yes | ||
| Power Supply | Single AA (1.5V) or CR123A (3V) | ||
| Environmental Rating | Water and Fog-Resistant / Waterproof (optional) | ||
| Operating Temperature | -40° to +50°С (-40° to 122°F) | ||
| Storage Temperature | -50° to +50°С (-58° to 122°F) | ||
| Included Accessories: | Battery adapter CR123A 3V / AA 1,5V XLR-IR850 Detachable X-Long Range Infrared Illuminator Battery Soft carrying Case AWReC (Advanced Wireless Remote Control) #94 Instruction Manual with Warranty Card Picatinny adapter for AWReC (Advanced Wireless Remote Control) Special Wrench Packing Box Light-Suppressor Lens Tissue |
||
| Optional Accessories: | FSRS (Front Scope Rail System) #38 Extended Rail Adapter #85 Mil-Standard Hard Shipping/Storage Case #102 XLR-IR A-Focal Doubler - Doubles the distance of XLR-IR850 IR beam |
||
| Warranty | Two years | ||